FRP confinement of masonry: analytical modeling

International and National Building Codes provide requirements for design and construction of new masonry structures, but design provisions for the repair, retrofitting, and rehabilitation of masonry structures are not always available and included in the same documents. Due to the extremely large variability in masonry performances, equations of general validity cannot often be provided, namely relationships suitable for every masonry type. Despite the great research effort in the experimental field, considerable theoretical work is still needed to fully outline a definitive analytical model to predict the behavior of FRP confined masonry. Most of the available models, empirical in nature, have been calibrated against their own sets of experimental data, or they are simply derived from concrete. Even if large amount of results obtained for concrete led to consolidated design guidelines, they cannot be simply extended to masonry. In this study, a mechanically based confinement model is proposed based on mechanical parameters able to differentiate similar masonry types and to highlight that they present different confinement performance. Crucial aspects of masonry confinement will be also discussed, namely: lateral dilation; confinement effectiveness; lateral pressure also in non-circular shapes; effective strain of FRP.     

A formal framework for secure and complying services

Internet is offering a variety of services that are assembled to accomplish requests made by clients. While serving a request, security of the communications and of the data exchanged among services is crucial. Since communications occur along specific channels, it is equally important to guarantee that the interactions between a client and a server never get blocked because either cannot access a selected channel. We address here both these problems, from a formal point of view. A static analysis is presented, guaranteeing that a composition of a client and of possibly nested services respects both security policies for access control, and compliance between clients and servers.     

Soot predictions in premixed and non-premixed laminar flames using a sectional approach for PAHs and soot

A new soot model is presented, which has been developed for CFD applications, combining accuracy and efficiency. While the chemical reactions of small gas phase species are captured by a detailed chemical kinetic mechanism, polycyclic aromatic hydrocarbons (PAHs) and soot particles are represented by sectional approaches. The latter account for important mechanisms such as the formation of sections, their oxidation, the condensation of acetylene, and the collisions between sections. The model has been designed to predict soot for a variety of fuels with good accuracy at relatively low computational cost. Universal model parameters are applied, which require no tuning in dependence of test case or fuel. Soot predictions of ethylene, propylene, kerosene surrogate, and toluene flames are presented, which show good agreement with the experimental data. Furthermore, the importance of the correct choice for thermodynamic data of PAHs and soot is highlighted and the impact of heat radiation is discussed.     

Experimental study on the restart of core-annular flow

We show the results of an experimental campaign to study the pressure drop during the restart of a core-annular flow from a stratified configuration. In normal core annular flow operations, due to fouling or pump failures, a core flow may not be sustained anymore and hence it stratifies. Since the pressure drops connected to the stratified flow regime are much larger than the ones of core annular, the flow suddenly stops. To restart it there are two possibilities: one is to try to provide a higher pressure gradient trying to restore the flow of water and oil, the other is to clean the pipe using water only: in both cases an attachment of a thin layer of oil on the pipe internal wall occurs and the pressure drop for water only or oil–water are higher than the previous ones with clean pipe wall. We focused our attention on the cleaning by water only and we provide experimental data on the evolution of the pressure drop as function of time in order to find when the pipe could be considered as perfectly cleaned or, at least, when the pressure drop are low enough to restart the oil flow. The experimental results are finally compared with a two-fluid model available in literature.     

Mechanical properties of virgin and recycled polyolefin‐based composite laminates reinforced with jute fabric

Polyolefin‐based composite laminates reinforced with jute fabric were prepared by compression molding and investigated in terms of flexural properties and impact behavior. The use of a virgin polypropylene as the matrix was compared with two polyolefin matrices coming from discarded car bumpers and selected packaging wastes, respectively, and mainly constituted by mixtures of polyethylene and polypropylene resins. The influence of a coupling agent (maleated polypropylene) was always considered in order to improve the interfacial adhesion and, consequently, the composite strength. The effect of this coupling agent, clearly dependent on the amount of polypropylene phase in the overall mixture, was found to be satisfactory only in the case of virgin polypropylene‐based systems. These latter, in presence of maleated polypropylene, have shown higher flexural parameters, lower propagation energy and higher breaking impact load with respect to uncompatibilized ones. Results were supported by morphological observations of impact surfaces, always highlighting a poor adhesion at the reinforcement–matrix interface except in compatibilized virgin polypropylene‐based laminates. POLYM. COMPOS., 36:2022–2029, 2015. © 2014 Society of Plastics Engineer     

Modeling of flexural behavior of RC beams strengthened with mechanically fastened FRP strips

An alternative to fiber reinforced polymer (FRP) materials adhesively bonded to the concrete substrate is the implementation of mechanically fastened FRP (MF-FRP) systems using steel anchors to secure the laminate to the substrate. The benefit of MF-FRP, compared to adhesive bonding for FRP flexural strengthening, is the speed of installation with unskilled labor, minimal or absent surface preparation under any meteorological condition and immediate use of the strengthened structures. Some of the potential shortcomings are: possible concrete damage during anchoring and limited opportunity of installation in the presence of congested internal reinforcement in the members to be strengthened. Laboratory testing and a number of field applications have shown the effectiveness of the MF-FRP method. In this paper, an analytical model is discussed for reinforced concrete (RC) members strengthened with MF-FRP strips. The model accounts for equilibrium, compatibility and constitutive relationships of the constituent materials; in particular, it accounts explicitly for the slip between the substrate surface and the FRP strip due to the behavior of the fasteners. The proposed flexural model, coupled with the computation algorithm, is able to predict the fundamentals of the behavior of RC flexural members strengthened with MF-FRP strips, in terms of both ultimate and serviceability limit states. Comparisons between the analytical predictions and the experimental results have been successfully performed.     

Histochemical characterization of the sialic acid residues in mouse colon mucins

The mucins of colonic murine mucus are highly O‐glycosilated sulfosialoglycoproteins. We have characterized the sialylation pattern of oligosaccharide chains of colonic murine mucins by conventional histochemical methods and by lectin histochemistry combined with chemical pretreatments and sialidase digestion. Oligosaccharide chains are strongly sulphated, with an increase of sulfation from the proximal toward the distal colon and a decrease of sialic acid expression and acetylation toward the distal colon. In the goblet cells of proximal colon, sialic acid bound α2,3 to Galβ1,3GalNAc subterminal dimers is diacetylated at C7,C8;C7,C9;C8,C9 or triacetylated at C7,8,9. In the distal colon, sialic acid‐linked α2,3 to Galβ1,3GalNAc subterminal dimers shows reduced O‐acetylation at C7 and/or C8, while acetyl substituents at C9 and at C4 are almost absent. Sialic acid is involved in different essential physiological functions; thus, alterations of its expression and acetylation in oligosaccharide chains of intestinal mucins are generally associated with diseases, such as ulcerative colitis and cancer. Mice may represent a suitable animal model to study alterations of oligosaccharidic chains in colonic mucins and lectin histochemistry combined with chemical pretreatments, and enzyme digestion may be a valuable tool for this study. Our present work may represent a landmark for further lectin histochemical studies to evaluate alterations of mouse colon mucins under different physiological, pathological, or experimental conditions, with possible translational value in humans. Microsc. Res. Tech., 2013. © 2012 Wiley Periodicals, Inc.     

Process simulation of a hybrid SOFC/mGT and enriched air/steam fluidized bed gasifier power plant

The aim of this work is to experimentally and numerically analyze the performance of a integrated power plant composed by a steam oxygen fluidized bed biomass gasifier fed by woods, a Solid Oxide Fuel Cell (SOFC) and a micro Gas Turbine (mGT). The numerical analysis is carried out by using ChemCAD software. In particular, SOFC and gasifier were modeled using proper developed Fortran subroutines interfaced to the basic software. The adopted SOFC model was already validated by the authors in previous works, while the gasifier model was here developed and validated by means of experimental activities carried out by using a bench scale gasifier. Different compounds (Benzene, Toluene, Naphthalene, Phenols) were chosen to analyze the tar evolution in the gaseous stream during the gasification process. Hot gas cleaning (based on catalytic ceramic filter candles inserted in the freeboard of the gasifier – UNIQUE concept) was adopted to remove tar and particulates from the fuel hot gas stream. Different moisture contents in the range between 10 and 30% (i.e. in a deviation of 10% around the usual wood moisture content of 20%) were numerically simulated as well as the degree of purity of the oxygen utilized in the power plant (between 25% and 95%, the rest being N₂). The power requirement for pure oxygen production leads to a reduction of the electrical efficiency of the whole power plant. For this reason, a sensitivity analysis was conducted to find the optimal operation conditions in order to maximise the syngas (H₂, CO) content in the produced gas, while maintaining a high overall electrical efficiency.     

Synthesis of Yb nanoparticles by laser ablation of ytterbium target in sodium bis(2-ethylhexyl)sulfosuccinate reverse micellar solution

Surfactant-coated ytterbium nanoparticles were produced by Nd:YAG laser ablation of a Yb bulk target immersed in sodium bis(2-ethylhexyl)sulfosuccinate (AOT)/n-heptane micellar solution. In our experimental conditions, as highlighted by IR spectroscopy, AOT molecules are not decomposed by the intense laser pulses but play a pivotal role in the stabilisation of Yb nanoparticles. The formation of Yb nanoparticles in the liquid phase was monitored by UV-Vis spectroscopy whereas the Yb/AOT composites obtained by evaporation of the organic solvent were characterised by XPS and TEM. Data analysis consistently shows the presence of surfactant-coated, nearly spherical and non-interacting Yb nanoparticles of mean diameter of 3 nm.Moreover, the presence of bigger polycrystalline nanoparticles (about 30%) in coexistence with smaller mono crystalline ones indicates that, after the rapid formation of the pristine Yb nanoparticles from plume condensation, two processes effectively compete for their size distribution: nanoparticle agglomeration and surfactant adsorption.